But not Limited to only 4 Cables

For those of you who have motorized vehicles, especially motorcycles, sometimes there are times when the ignition switch or other terms the ignition switch which is often used to turn the engine on and off is damaged. Whether it's damage caused by worn mechanics or the electrical system on the ignition itself is not good at conducting electricity. This damage usually occurs due to the use and age of the ignition key. If it has been damaged, of course, the best step is to replace the motorcycle ignition module as a whole because this concerns the safety and comfort of the motorcycle user itself. However, before buying and installing a motorcycle ignition module, it would be nice to learn a little about the motorcycle's electrical system, especially the ignition key so that in the installation there are no errors and can result in a short circuit of electric current which can cause damage to other electrical systems on the motorcycle. Talking about the electrical parts on the motor, of course, cannot be separated from the automotive motor cable. In general, motorcycle ignition keys have many variations in the number of cables or connections depending on the brand and type and even the country of origin of manufacture. In Indonesia alone, most Japanese brand motorcycles have 2 cables and 4 cables. In the old motors that still use a simple circuit, the ignition key only has 2 wires, while today's motors mostly have 4 wires. But not limited to only 4 wires, certain types of motors, especially those with more sophisticated security systems will have more than 4 wires. So specifically when you want to change the ignition on a motorcycle, make sure you buy an ignition key that fits your motorbike (brand and type) because each motorbike usually has a different ignition key design.

It also aims to facilitate the installation of the ignition key because if you buy the right ignition, the installation will be plug n play. Basically, the motorcycle ignition key is made to turn on and off the engine of the motorcycle (function factor) and of course to prevent other people from using the motorcycle without the permission of the owner (safety factor). The simplest and main motorcycle ignition circuit is to connect or disconnect the electric current to the CDI or coil on the motor (an electronic device that functions to regulate the ignition system on the engine). So that when the motorcycle ignition is positioned in the ON position, the CDI will get an electric current and be ready to start the engine while in the OFF position, the CDI will not get an electric current so that the ignition on the engine will stop and cause the engine to die.

It all depends on the level of sophistication and the brand of the motorcycle.

To increase the safety factor and increase the motorcycle electrical system for today's motorcycles, usually the ignition is equipped with a mechanic to lock the motorcycle handlebars and has more than 2 cable connections to power other electrical systems such as the BCU " Body Control Unit (electronic device). which regulates lights, digital speedometer, etc.), ECUвЂ" Engine Control Unit (for motors using a fuel injection system), etc. " battery or motor body, CDI, and motor accessories (such as lamps). For the colors of the wires themselves it is difficult to standardize because each brand has its own standard wire color, but in general the positive electric pole is usually red while for the ground or pole the negative is black. The connection to the motorcycle ignition is as discussed above, there is no standard standard for the number of wires. It all depends on the level of sophistication and the brand of the motorcycle. So much information about how to install a motorcycle ignition, I hope it's useful! Or soon contact our CS for a more detailed explanation.

How to Check Vehicle Number Plate Owners Online, Easy!

Are you planning to buy an automatic car? Or planning to ride it in the near future? Maybe you already know that the way to drive an automatic car is different from the usual car, which shifts the gears manually. Automatic cars have automatic transmissions, where the automatic car gearshift system is designed to be able to move without having to step on the clutch pedal. Automatic transmission has two types of systems, both of which are also known to be simpler and easier, namely semi-automatic and automatic systems. This is How to Check Jakarta Number Plates, Easy! Even though it's automatic, it doesn't mean that driving an automatic type car is just playing the gas and brakes. You also have to be required to have a good feeling in measuring engine power because automatic cars also have transmissions that you can adjust depending on your needs. You will meet the automatic transmission lever with the code P, R, N, D, D3, 2 and L. If you are a new player in driving an automatic car, you are definitely confused by the letters and numbers that are rarely found. 9 Ways to Get Rid of Stickers on Motorcycles, Smooth Back Again! How to Check Vehicle Number Plate Owners Online, Easy! Complete Car Window Film Price List, Must Know! Well, to help you recognize a dead car gear, Qoala will explain in full about automatic car gear, from how to drive it, the meaning and function of each of the codes above and other information you need to drive an automatic car through this review.

First before starting the engine, the lever position must be in the P position or in the N position.

If it's your first time driving an automatic car, you may be a little confused about how to drive it. Especially if you are used to using a manual car, which has a different way of operating the gear from the automatic one. This is because you don't have to adjust the clutch or shift gear because it's done automatically. You just need to stop and go without shifting gears or playing the clutch. But if you are not used to having to be careful, you might get confused between the brake pedal and the pedal or the wrong way to use the automatic car gear. Not infrequently heard of accidents because they are not familiar with how to shift gears automatic cars that are not familiar. Therefore you must know some important things in how to drive an automatic car below. As a beginner you need to be careful so that the lever is always in the correct position. First before starting the engine, the lever position must be in the P position or in the N position. Do not position the lever in reverse or R, these positions are used to reverse. If the lever is in the R position, the car will not start when it is started.

It is important to depress the brake pedal at the same time as moving the lever in gear.

When you enter the key, do not immediately start the engine. You should wait for the needle to spin until the indicator is active or lit which indicates the electricity is ready. Some types of automatic cars provide an indicator in the form of sound when the car is really ready to be started. When first starting, it is recommended to step on and hold the brake pedal for safety reasons because you are afraid that the car will suddenly accelerate forward. Some automatic cars have an automatic procedure that keeps the engine running if you don't press the brake pedal, although some don't. When the engine is on and you want to start moving, the first step that needs to be done is to change the gear position of your automatic car which was originally in position P or N, to position R to go backwards or D to go forward. It is important to depress the brake pedal at the same time as moving the lever in gear. This method can prevent damage to the machine. The transmission lever aka gear or automatic car gear is an important component that affects the speed of the car.

In general, whether it's Agya automatic car gear, Mobilio automatic car gear or others have DSLPR and N automatic car gears. Well, you need to understand each function of the automatic car gear. Riding mode or driving mode is present as a supporting feature in automatic cars now with varied choices. You can choose the mode that suits your needs, one of which is the economic mode. This economical mode is suitable for those of you who want to drive an automatic car more relaxed. If you want to go at a higher speed, you can choose the sport mode. This mode will set the car engine to maximum performance. There are still several more types of modes offered, please learn and use as needed. Automatic cars are also usually equipped with manual mode. Even though it's called manual, it doesn't mean you will operate it the same as a non-matic car. That's roughly how to drive an automatic transmission car alias matic. It's actually simpler and more practical than the manual one, but if you're not familiar, it takes time to adjust. Especially from the transmission side which uses different codes. Not only numbers that indicate the order of teeth as in manual cars, but the shape of the teeth of automatic cars also uses a code in the form of letters to indicate their respective functions. What are the codes and their functions? Let's move on to the next discussion. As already mentioned a little above, in general, the transmission lever is marked with letters and numbers, namely P, R, N, D, 2, and L. This is standardly applied to various brands, be it in Xpander automatic car gears, gear shifters Honda Jazz automatic car, Ayla automatic car gear and even Avanza automatic car gear.

Related posts