Does a Matic Motor Need to be Serviced?

In Indonesia, the trend of using automatic motorcycles is already massive. Both women and men are accustomed to using these motorcycles, so that their market share beats motorcycles and motorsports. It is not surprising that many motorcycle manufacturers in this country are competing to market their automatic motorcycles. Like Honda, which issued a Vario motorbike, one of them. We are certainly familiar with this motor which is the output of the well-known brand Honda with various types such as the Bario 110, Vario Techno 125, to Vario 150 which have a carburetor combustion system or injection. Unfortunately, many of our people can only ride a vario matic motorbike, but pay less attention to automatic motorbike maintenance. New or used motorbikes, in fact need maintenance to make this vehicle last longer.

  • Now additional settings menu
  • First, press Windows key + R to open the Run. window
  • Netflix Streaming Services, Inc
  • Attach the other end of the hose to the regulator
  • Choose a seller marked COD in the store
  • Bank CIMB Niaga: 14041
  • Then enter memory usage
  • Emergency or additional costs: IDR 1.5 million

No need to regret it, in fact not everyone understands how the condition of a good automatic motorcycle engine is. So if you are an automatic motorbike user, maybe tips on how to take care of an automatic motorbike this time can be practiced at home so that the motorbike engine remains durable and long lasting. For that, let's just take a look at how to take care of the full Vario Techno 125 automatic below. Don't worry, these tips can also be applied to treat Vario 110, Vario 150, or other automatic motorcycles under any circumstances. However, it should be noted, although not much different from the maintenance of the motor in general, the maintenance of an automatic motor that uses a carbulator combustion system or injection requires special care that is more painstaking. Heating the motor is a way of treating by heating the engine so that the oil in the engine is ready to lubricate the engine so that the performance of the engine is maximized. A good way to heat an automatic motor is to heat the motor for approximately 5 minutes to 10 minutes and you should only use a kick starter if you use an electric starter, of course, it will reduce the battery more of the motor. This automatic motor maintenance is classified as the most important thing, for that as maintenance, do it according to the oil change schedule which is usually done every 1000 km and for the maximum motor transmission oil change (axle oil) when the motor has reached 5000 km. If the kilometer reference for changing the oil is forgotten, you should do this routine maintenance every 2 to 3 months and don't forget to use oil that matches the specifications of the automatic motor you have. In maintaining and caring for an automatic motorbike, a bad habit that often occurs is an automatic motorbike until it runs out of gas.

Because, without realizing this will damage the life of the machine.

Do not let the automatic motor stop on the road because the gasoline runs out because it can damage the motor engine. Especially on the injection motor matic. For this reason, always try to keep the automatic motor from showing the E indicator on the speedometer and get used to the motor containing full fuel to anticipate this. The importance of checking the condition of the vanbelt is something that should not be abandoned for automatic motorcycle owners. The condition of the vanbelt which has a material made of rubber is feared to be broken in the middle of the road which causes the motor to stop and cannot run anymore. If it is a must to replace the vanbelt, you should use original spare parts so that the automatic motorbike is more secure because it is definitely more durable. It is not easy to know the condition of the battery in the automatic motor, so that every automatic motorbike user, the majority of their motorbikes have experienced AKI Dead. If this happens, of course you will lose power from the motor, besides that the light will decrease, and the most annoying thing if the automatic motorcycle battery dies is when you turn on the motor you have to use a kick starter which makes you feel like you spend more energy. Therefore, it is recommended that users should replace the AKI within 7 - 8 months after the last replacement. Usually this is often done by automatic motor users, namely when the speed of the motor in fast conditions suddenly lowers the gas and vice versa. Because, without realizing this will damage the life of the machine. With a less stable speed, it will not only damage the engine but also the vanbelt of the motor. Oil is also indeed not only found in the motor engine, but oil is also found in the shockbreaker.

Therefore, it is necessary to replace it with the aim of nothing but the condition of the shock motor still functioning normally. Maintenance on periodic servicing of automatic motors usually includes changing oil, cleaning the carburetor and setting the motor. Are the batteries still decent, Vanbelts and rollers need replacement, of these things, of course, it will be better if the spare parts are used with the original ones. Perform periodic service approximately once every 3 months to maintain the performance of your automatic motorcycle. Tips and how to take care of the last Matic Motor is difficult and easy. Because, not infrequently there are people who sell mixed gasoline. The quality of gasoline greatly affects the quality of your motorcycle engine, for that you should fill up your motorcycle at the right place and managed by the government (POM) or places that sell gasoline that are already trusted. However, usually after five years of use, the performance of the engine and other components will usually decrease, besides that it will be very appropriate if you upgrade or replace the motorcycle with a new one of course. Because if not, the motor will very often require service and its performance continues to decline.

Are you planning to buy an automatic car? Or planning to ride it in the near future? Maybe you already know that the way to drive an automatic car is different from the usual car, which shifts the gears manually. Automatic cars have automatic transmissions, where the automatic car gearshift system is designed to be able to move without having to step on the clutch pedal. Automatic transmission has two types of systems, both of which are also known to be simpler and easier, namely semi-automatic and automatic systems. This is How to Check Jakarta Number Plates, Easy! Even though it's automatic, it doesn't mean that driving an automatic type car is just playing the gas and brakes. You also have to be required to have a good feeling in measuring engine power because automatic cars also have transmissions that you can adjust depending on your needs. You will meet the automatic transmission lever with the code P, R, N, D, D3, 2 and L. If you are a new player in driving an automatic car, you are definitely confused by the letters and numbers that are rarely found. 9 Ways to Get Rid of Stickers on Motorcycles, Smooth Back Again! How to Check Vehicle Number Plate Owners Online, Easy! Complete Car Window Film Price List, Must Know! Well, to help you recognize a dead car gear, Qoala will explain in full about automatic car gear, from how to drive it, the meaning and function of each of the codes above and other information you need to drive an automatic car through this review.

As a beginner you need to be careful so that the lever is always in the correct position.

If it's your first time driving an automatic car, you may be a little confused about how to drive it. Especially if you are used to using a manual car, which has a different way of operating the gear from the automatic one. This is because you don't have to adjust the clutch or shift gear because it's done automatically. You just need to stop and go without shifting gears or playing the clutch. But if you are not used to having to be careful, you might get confused between the brake pedal and the pedal or the wrong way to use the automatic car gear. Not infrequently heard of accidents because they are not familiar with how to shift gears automatic cars that are not familiar. Therefore you must know some important things in how to drive an automatic car below. As a beginner you need to be careful so that the lever is always in the correct position. First before starting the engine, the lever position must be in the P position or in the N position. Do not position the lever in reverse or R, these positions are used to reverse. If the lever is in the R position, the car will not start when it is started.

When you enter the key, do not immediately start the engine. You should wait for the needle to spin until the indicator is active or lit which indicates the electricity is ready. Some types of automatic cars provide an indicator in the form of sound when the car is really ready to be started. When first starting, it is recommended to step on and hold the brake pedal for safety reasons because you are afraid that the car will suddenly accelerate forward. Some automatic cars have an automatic procedure that keeps the engine running if you don't press the brake pedal, although some don't. When the engine is on and you want to start moving, the first step that needs to be done is to change the gear position of your automatic car which was originally in position P or N, to position R to go backwards or D to go forward. It is important to depress the brake pedal at the same time as moving the lever in gear. This method can prevent damage to the machine. The transmission lever aka gear or automatic car gear is an important component that affects the speed of the car.

In general, whether it's Agya automatic car gear, Mobilio automatic car gear or others have DSLPR and N automatic car gears. Well, you need to understand each function of the automatic car gear. Riding mode or driving mode is present as a supporting feature in automatic cars now with varied choices. You can choose the mode that suits your needs, one of which is the economic mode. This economical mode is suitable for those of you who want to drive an automatic car more relaxed. If you want to go at a higher speed, you can choose the sport mode. This mode will set the car engine to maximum performance. There are still several more types of modes offered, please learn and use as needed. Automatic cars are also usually equipped with manual mode. Even though it's called manual, it doesn't mean you will operate it the same as a non-matic car. That's roughly how to drive an automatic transmission car alias matic. It's actually simpler and more practical than the manual one, but if you're not familiar, it takes time to adjust. Especially from the transmission side which uses different codes. Not only numbers that indicate the order of teeth as in manual cars, but the shape of the teeth of automatic cars also uses a code in the form of letters to indicate their respective functions. What are the codes and their functions? Let's move on to the next discussion. As already mentioned a little above, in general, the transmission lever is marked with letters and numbers, namely P, R, N, D, 2, and L. This is standardly applied to various brands, be it in Xpander automatic car gears, gear shifters Honda Jazz automatic car, Ayla automatic car gear and even Avanza automatic car gear.

Related posts