The series of commemorations of the 74th Cooperative Day in 2021 will be carried out through online media, considering that the COVID-19 pandemic has not yet ended. Even now, to suppress the increase in the number of COVID-19 sufferers, an Emergency Community Activity Restriction (PPKM) is being carried out which applies to the islands of Java and Bali, from 3 to one. Cooperative. The activity was held on Thursday (15/7/2021) which was attended by the ranks of the Office in charge of Cooperatives, Cooperative Extension Officers (PPKL), as well as the Cooperative movement throughout Indonesia. Not to forget, the Kulon Progo Regency SME Cooperative Service also participated in the webinar which was held in the local Office Meeting Room. Present at the event were the Head of the SME Cooperative Service (Dra. Head of Institutional and Supervision Head (Ir. PPKL and all staff. There were three resource persons who conveyed the material on Cooperative Supervision, namely: Suparyono, SH, MM as the Assistant Deputy for Cooperative Supervision at the Ministry of Cooperatives for SMEs RI, Dr. Indoyama as Academician, and Dandy Bagus Ariyanto, SH, MH as Head of Cooperative Inspection at the Ministry of Cooperatives for SMEs RI. 1. Supervision and Examination using the same standard (Ministerial Regulation) based on potential risk (KUK 1, 2, 3, 4) For KUK 3 and 4, a fit and proper test is carried out. 3. There is 1 (one) cooperative health examination working paper. 6. Administrative sanctions are given according to the level of the problem or violation in the form of a warning letter, a decrease in the level of health, restrictions on business activities, suspension of permits, revocation of permits and dissolution.
4. Cooperative membership area in 1 (one) regency/city area by the Regency/Municipal Government.
1. The Central Government and Regional Governments are responsible for organizing Cooperative Supervision in accordance with the Cooperative membership area. 2. Cooperative membership area across provinces by the Ministry of Cooperatives and Small and Medium Enterprises. 3. Cooperative membership area across regencies/municipalities in 1 (one) provincial area by the provincial government. 4. Cooperative membership area in 1 (one) regency/city area by the Regency/Municipal Government. 5. Supervision of Cooperatives is carried out by Cooperative Supervisory Functional Officers within the scope of the Ministry of Cooperatives and SMEs, Provincial Governments, and Regency/Municipal Governments. 1. In the event that the Cooperative Supervisory Functional Officer is not fulfilled within the government agency, the implementation of the Cooperative Supervision task is determined by the official having the authority in the field of cooperatives in accordance with the provisions of the legislation. 2. Civil servants who are not Cooperative Supervisory Functional Officers may carry out Cooperative Supervision duties for a certain period of time after receiving an assignment from the Ministry of Cooperatives and Small and Medium Enterprises.
3. Civil servants in the local government agencies who are not the Cooperative Supervisory Functional Officers can carry out the tasks of Cooperative Supervision for a certain period of time from the Regional Apparatus after obtaining a recommendation from the Ministry of Cooperatives and Small and Medium Enterprises. 4. The period of execution of the Cooperative Supervision tasks by the Cooperative Supervisor who is not a Cooperative Supervisory Functional Officer is no later than 5 (five) years since the promulgation of this Ministerial Regulation. 5. After the expiry of the implementation of the tasks referred to above, the Cooperative Supervision shall be carried out by the Cooperative Supervisory Functional Officer. While Dr. Indoyama conveyed the Aspects and Indicators of Measurement in Cooperative Inspection. It was said that in carrying out the examination of Cooperatives there are several aspects that need to be considered and examined, namely: Governance, Risk Profile, Financial Performance, and Capital.
Furthermore, Dandy Bagus Ariyanto, SH, MH conveyed the Fit and Proper Test for Cooperative Management and Supervisors. The purpose is to provide standard guidelines on Fit and Proper Test for Management and Supervisors who prioritize Cooperatives with Cooperative Business Classification (KUK) 3 and 4. Meanwhile, the goal to be achieved is to create strong, healthy, independent, resilient and empowered cooperatives. competitiveness, which is managed in a transparent and accountable manner by the Management and Supervisors who have high integrity, are credible, innovative and responsible. 1. Candidates for Managers and Supervisors are not currently undergoing a legal process. 2. Candidates for the Management and Supervisory Board are proposed by the Meeting of Members for Programming and Budgeting Plans for Cooperative Income and Expenditures (RAPBK). 3. The application for the Fit and Proper Test is addressed to the Deputy/Head of Service in accordance with their respective authorities according to the attachment format. 4. Candidates for Cooperative Managers and Supervisors who are submitted will be self-assessed. 5. If the administrative requirements for the candidates for Managers and Supervisors are incomplete, they will be returned to the applicant for completion.
10. The Fit and Proper Test shall be carried out by: a.
6. Cooperatives may nominate candidates for Managers and Supervisors of at least 3 (three) persons and a maximum of 9 (nine) persons for the positions of Management and Supervisors of Cooperatives. 7. Administrative assessment and interview. 8. Prospective Managers and Supervisors must make presentations or presentations that can be done online or offline, with at least the following materials: a. Plans of candidates for Management and Supervisors on the development of Cooperatives; and/or, b. 9. Clarification is carried out if: a. There is negative information regarding candidates for Management and Supervisors; b. Candidates for Management and Supervisors do not have experience in cooperatives that are relevant to the intended position and take into account the position, size, complexity, and/or problems of the cooperative where the person concerned will be nominated; and/or c. Candidates for Management and Supervisors are determined not to be recommended in the Program Preparation Member Meeting and RAPBK. 10. The Fit and Proper Test shall be carried out by: a. The Fit and Proper Testing Team, in accordance with the membership area of the Cooperative. The Fit and Proper Testing Team consists of at least 3 (three) people who come from elements of Structural Officials at least Echelon III and/or Functional Officers of Supervisory Cooperatives of Associate Experts; c. In the event that there is no official as intended, it can coordinate with the nearest Head of Service. With the implementation of the supervision of the Cooperative, it is hoped that it will create a cooperative that is strong, healthy, independent, tough, and competitive in accordance with the identity of the Cooperative. So that the Cooperative is truly able to provide the maximum benefit for the welfare of its members and society in general.
How to Check Vehicle Number Plate Owners Online, Easy!
Are you planning to buy an automatic car? Or planning to ride it in the near future? Maybe you already know that the way to drive an automatic car is different from the usual car, which shifts the gears manually. Automatic cars have automatic transmissions, where the automatic car gearshift system is designed to be able to move without having to step on the clutch pedal. Automatic transmission has two types of systems, both of which are also known to be simpler and easier, namely semi-automatic and automatic systems. This is How to Check Jakarta Number Plates, Easy! Even though it's automatic, it doesn't mean that driving an automatic type car is just playing the gas and brakes. You also have to be required to have a good feeling in measuring engine power because automatic cars also have transmissions that you can adjust depending on your needs. You will meet the automatic transmission lever with the code P, R, N, D, D3, 2 and L. If you are a new player in driving an automatic car, you are definitely confused by the letters and numbers that are rarely found. 9 Ways to Get Rid of Stickers on Motorcycles, Smooth Back Again! How to Check Vehicle Number Plate Owners Online, Easy! Complete Car Window Film Price List, Must Know! Well, to help you recognize a dead car gear, Qoala will explain in full about automatic car gear, from how to drive it, the meaning and function of each of the codes above and other information you need to drive an automatic car through this review.
If it's your first time driving an automatic car, you may be a little confused about how to drive it. Especially if you are used to using a manual car, which has a different way of operating the gear from the automatic one. This is because you don't have to adjust the clutch or shift gear because it's done automatically. You just need to stop and go without shifting gears or playing the clutch. But if you are not used to having to be careful, you might get confused between the brake pedal and the pedal or the wrong way to use the automatic car gear. Not infrequently heard of accidents because they are not familiar with how to shift gears automatic cars that are not familiar. Therefore you must know some important things in how to drive an automatic car below. As a beginner you need to be careful so that the lever is always in the correct position. First before starting the engine, the lever position must be in the P position or in the N position. Do not position the lever in reverse or R, these positions are used to reverse. If the lever is in the R position, the car will not start when it is started.