With a bigger engine, of course, Mio M3 and Soul GT offer more capable performance. So the question is what about gasoline consumption? Is it much more wasteful or is it still equal? In order to answer that, this time the AUTOMOTIVE Team tested the gasoline consumption of 5 motorcycles at once. And specifically for nex FI and Mio J, we took the data from the test ride results, because the test unit was not available. The test is deliberately simulated as daily use by a 173 cm 63 kg tester. Motorcycles are used for normal activities, taking various routes from traffic jams in the morning and evening, to smooth roads at night. The route taken is the same, namely crossing the West Jakarta, South Jakarta and South Tangerang areas. The measurement uses the full to full method with 92 RON gasoline. Data collection is carried out 3 times to reduce the risk of error, for example when filling gasoline. The motors used are factory standard conditions, the units used are loans from each APM.
The result is that each liter can cover a distance of 47.2 km.
The mainstay of Suzuki, which is also exported to Europe, is equipped with a 113 cc engine, unfortunately bore x stroke, power and torque are not listed on Suzuki's official website. What is certain is that it has an empty weight of 96 kg and is sold for only Rp. 14.1 million. The result is that every 1 liter of gasoline can be used to cover a distance of 40 km. snickered the tester. Vario FI is still equipped with an early generation 108 cc engine, bore x stroke,50 x 55 mm producing 8.4 hp/8,000 rpm and 8.73 Nm/6,500 rpm of torque. The empty weight is 95 kg. The scooter sold Rp. 15.8 million, the character is a little more aggressive than the BEAT and there is no ISS, so it's not surprising that gasoline consumption is more wasteful than the BEAT eSP. The result is that every 1 liter of gasoline can cover a distance of 42.5 km on average. In Indonesia, with sales of over 120 thousand units per month, BEAT is equipped with an eSP engine with a capacity of 108.2 cc from bore x stroke of 50 x 55.1 mm, producing 8.6 hp/7,500 rpm and 9.01 Nm/6,500 rpm of torque. The empty weight is 95 kg. The motorcycle, which is sold for a range of Rp. 14.35-15.05 million, is equipped with ISS (idling stop system) technology, every time it encounters a red light or gets stuck and stops for more than 3 seconds, the engine automatically shuts down and can immediately turn on again just by turning the gas sleeve. So do not be surprised if it helps save gasoline consumption. The result is that each liter can cover a distance of 47.2 km. Using an 113.7 cc engine, from a bore of 50 mm and a stroke of 57.9 mm, supplied with YMJet-FI injection gasoline, the Mio J has a maximum power of 7.67 hp/5,000 rpm and a torque of 8.5 Nm/5,000 rpm.
The result is that each liter can cover a distance of 41.3 km.
The weight of the contents of the Mio J is only 92 kg. The character of the engine is smooth at the initial gas opening, the motorbike which is sold for Rp. 13.35 million has less gasoline consumption than its 2 brothers, each liter can only cover a distance of 41 km. Using a 125 cc engine, from bore x stroke 52.4 x 57.9 mm, capable of producing 9.4 hp/8,000 rpm and 9.6 Nm/5,500 rpm of torque. The embedded technology is called Blue Core, with the advantage of minimal friction so that it is powerful and economical. The weight of the contents of the radius version is only 92 kg. Mio M3 which is priced at Rp. 13.98 million per 1 liter of gasoline can cover a distance of 46 km. It's natural to get that number, because the pull from the beginning of the gas opening is indeed sloppy, moreover there is an eco indicator on the speedometer which indirectly affects the tester for smoother riding. Using the same engine as the Address, 113 cc which is fairly powerful, but has an empty weight of only 87 kg, the lightest in its class. So don't be surprised when testing it is similar to when you bring the address, you want the gas poll to continue. The result is that each liter can cover a distance of 41.3 km. Using the same engine as the Mio M3, 125 cc Blue Core, the power and torque are exactly the same, including the eco indicator on the speedometer. It's just that it's wrapped in more advanced designs and features, no wonder the price is more expensive, to be exact, IDR 15.1 million.
The injection era does make it more economical!
With the same engine but slightly heavier weight, 96 kg, gasoline consumption was slightly adrift, to be precise 45 km/lt. It's a drop with the Mio M3. After going through this test, it turns out that the gasoline consumption of the entry-level scooter, which has all been injected, is slightly different. Oh yes, it should be noted that the difference can also be due to the way you take the motorbike and traffic conditions. When compared with the carburetor era, of course, the difference is far, for example the Yamaha Mio Sporty which is still a carburetor, the fuel consumption is only 33 km / lt. The injection era does make it more economical! Rumors Back to Moto2 are getting more popular, Remy Gardner Joins Valentino Rossi's Team? Wow.. After the Dakar Rally and F1, Saudi Arabia held a MotoGP race, at what circuit?
Are you planning to buy an automatic car? Or planning to ride it in the near future? Maybe you already know that the way to drive an automatic car is different from the usual car, which shifts the gears manually. Automatic cars have automatic transmissions, where the automatic car gearshift system is designed to be able to move without having to step on the clutch pedal. Automatic transmission has two types of systems, both of which are also known to be simpler and easier, namely semi-automatic and automatic systems. This is How to Check Jakarta Number Plates, Easy! Even though it's automatic, it doesn't mean that driving an automatic type car is just playing the gas and brakes. You also have to be required to have a good feeling in measuring engine power because automatic cars also have transmissions that you can adjust depending on your needs. You will meet the automatic transmission lever with the code P, R, N, D, D3, 2 and L. If you are a new player in driving an automatic car, you are definitely confused by the letters and numbers that are rarely found. 9 Ways to Get Rid of Stickers on Motorcycles, Smooth Back Again! How to Check Vehicle Number Plate Owners Online, Easy! Complete Car Window Film Price List, Must Know! Well, to help you recognize a dead car gear, Qoala will explain in full about automatic car gear, from how to drive it, the meaning and function of each of the codes above and other information you need to drive an automatic car through this review.
As a beginner you need to be careful so that the lever is always in the correct position.
If it's your first time driving an automatic car, you may be a little confused about how to drive it. Especially if you are used to using a manual car, which has a different way of operating the gear from the automatic one. This is because you don't have to adjust the clutch or shift gear because it's done automatically. You just need to stop and go without shifting gears or playing the clutch. But if you are not used to having to be careful, you might get confused between the brake pedal and the pedal or the wrong way to use the automatic car gear. Not infrequently heard of accidents because they are not familiar with how to shift gears automatic cars that are not familiar. Therefore you must know some important things in how to drive an automatic car below. As a beginner you need to be careful so that the lever is always in the correct position. First before starting the engine, the lever position must be in the P position or in the N position. Do not position the lever in reverse or R, these positions are used to reverse. If the lever is in the R position, the car will not start when it is started.
This method can prevent damage to the machine.
When you enter the key, do not immediately start the engine. You should wait for the needle to spin until the indicator is active or lit which indicates the electricity is ready. Some types of automatic cars provide an indicator in the form of sound when the car is really ready to be started. When first starting, it is recommended to step on and hold the brake pedal for safety reasons because you are afraid that the car will suddenly accelerate forward. Some automatic cars have an automatic procedure that keeps the engine running if you don't press the brake pedal, although some don't. When the engine is on and you want to start moving, the first step that needs to be done is to change the gear position of your automatic car which was originally in position P or N, to position R to go backwards or D to go forward. It is important to depress the brake pedal at the same time as moving the lever in gear. This method can prevent damage to the machine. The transmission lever aka gear or automatic car gear is an important component that affects the speed of the car.
39;s move on to the next discussion.
In general, whether it's Agya automatic car gear, Mobilio automatic car gear or others have DSLPR and N automatic car gears. Well, you need to understand each function of the automatic car gear. Riding mode or driving mode is present as a supporting feature in automatic cars now with varied choices. You can choose the mode that suits your needs, one of which is the economic mode. This economical mode is suitable for those of you who want to drive an automatic car more relaxed. If you want to go at a higher speed, you can choose the sport mode. This mode will set the car engine to maximum performance. There are still several more types of modes offered, please learn and use as needed. Automatic cars are also usually equipped with manual mode. Even though it's called manual, it doesn't mean you will operate it the same as a non-matic car. That's roughly how to drive an automatic transmission car alias matic. It's actually simpler and more practical than the manual one, but if you're not familiar, it takes time to adjust. Especially from the transmission side which uses different codes. Not only numbers that indicate the order of teeth as in manual cars, but the shape of the teeth of automatic cars also uses a code in the form of letters to indicate their respective functions. What are the codes and their functions? Let's move on to the next discussion. As already mentioned a little above, in general, the transmission lever is marked with letters and numbers, namely P, R, N, D, 2, and L. This is standardly applied to various brands, be it in Xpander automatic car gears, gear shifters Honda Jazz automatic car, Ayla automatic car gear and even Avanza automatic car gear.
- Past memories
- 2 GB internet package, next and quit options
- Using USB WIFI
- Fasting more
- What are the important things to do before submitting a complaint,
- Shopee Account Restricted
- Method of financial needs based value
- Maria Pauline Lumowa
Therefore, in order to drive an automatic car well, you need to know what the letters and numbers mean and what their functions are. The letter P on automatic car gear stands for Parking alias parking. When you set the gear in this P position, the transmission will be locked and the car engine cannot move. But that does not mean its function is the same as the parking brake. Unlike the parking brake, when the transmission lever is in the P position, the car's wheels can actually move, but the transmission is locked and the engine cannot move. That's why the P position is used when the car is stopped for a long time or in parking conditions. The R symbol in automatic car gear stands for reverse.