How to Reinstall Windows 7

Here is a complete guide on installing the Windows 7 operating system on a PC, laptop, or computer with pictures, very useful for beginners as well as experienced ones. This guide can also be used for reinstalling from scratch with a CD/DVD. Fresh Install or Clean Install Windows 7 is to remove the existing operating system completely without remaining, such as Windows XP, Linux, the old Windows 7, Windows 8, or others, then replace it with the new Windows 7, in other words this way will delete the entire system on one partition, including viruses if any, then the system is completely clean of viruses. Pay attention to the minimum hardware specifications to install windows. It is mandatory to prepare the windows drivers needed to maximize the performance of the windows system. Prepare applications or programs for the most important and frequently used computers or laptops, because after the original windows only provide limited programs or software.

  • Right-click on the problematic Network Adapter, then press Diagnose
  • Click Top Up GoPay
  • Avoid all foods that cause allergies, then slowly reintroduce them
  • Don't get addicted to Strava
  • Toyota Alphard 3.5 Q AT Rp28 million

When installing or reinstalling Windows 7, we recommend that you wipe the primary "hard drive" partition or "primary partition" so that it is clean. This procedure is referred to as "Clean Install" or "Advanced/Custom install". When starting the installation you will need to first "boot" from the "CD/DVD" drive if using the "Windows 7 Installer CD/DVD" chip or from a USB device if using a Flashdisk. Setting the first "boot" or "boot" option from your CD / DVD or flash drive must be set in the "BIOS Menu" described below and specifically for booting from a flash drive, so first insert the flash drive before turning on the computer or laptop. Here is a video to install windows 7 Ultimate (5 minutes) 32-bit or 64-bit, but in general it can be used as a guide for other editions, because the process is almost the same only slightly different in appearance.

Wait for the system process.

Turn on the Computer or Laptop, then enter the "BIOS" Menu. In order to enter the BIOS MENU, WHEN turning on the Laptop or Computer as shown above, press and hold the F2 key quickly, on some other brand laptops press Esc, F1, F10 or Del on the computer. Note, on some laptop brands, you may also press the "fn" key along with F1/F2 etc., so that the key works. Enter the BIOS menu. Enter MENU "BIOS" for first boot settings. The picture above is an example of entering the "BIOS" or "Setup Utility" menu, this display varies depending on the brand. Set Boot. Look for the "Boot" Tab Menu to set the First "Boot". Navigate First Boot So CD-DVD or Flashdisk as desired, this display also varies depending on the brand. Change the first "Boot" on the "BIOS" Menu to a CD/DVD or Flashdisk, but if from a Flashdisk change the first "boot" to a Flashdisk, this is needed so that "Boot" is the first time to read Windows 7 CD/DVD media or Flashdisk. Especially for the first boot from the flash, it must first enter the flash before turning on the computer or laptop. Save Settings. Click "Exit" and then "Exit Saving Changes" by clicking "Yes". The computer or laptop will immediately "restart" from the DVD. Don't forget to first insert the Windows 7 "Installer" DVD into the DVD Drive, before "restarting". Start Booting. The PC will start booting from the Windows 7 "Installer" DVD. Click Anything on the keyboard, for example, click "Enter" and the time is only 5 seconds, if 5 seconds is not clicked, the process will not occur, you have to "restart" again. Wait for the system process. In this Step do nothing.

Select a language. Select English, Click "Next". Start the Install Process. Click "Install Now". Confirm Approval. Click "I accept the license terms", then click "Next". Click for installation approval. In this Step, very important, Click "Custom advanced". This step means it will install Windows 7 from scratch, so it will be like new later, and wipe out all the old system. Organize partition. Arrange the partitions as you wish. In this step it is important to set the partition to be installed on the new Windows 7. The picture above is an example of a laptop that has 3 partitions, the first is System Reserved, the second is old Windows 7 alias (C:), and the third is Data alias (D:). Note, if in the picture above the box is empty, it means the hard disk is not readable, then the hard disk is probably damaged or not good or the cable to the hard disk is not good or not detected. Wipe the previous System Partition. "Delete" the old Windows System Partition.

Create a new Partition.

With Delete Partition, the Old system (C:) will be deleted, and My Documents will be deleted entirely, because My Documents is included (C:). So if you save the data in the future, it is better to (D:) or (E:). Hover the cursor to delete the partition by clicking "Delete", then clicking OK - OK, until the display in the next image appears. Create a new Partition. Create a new partition with sufficient hard disk space. Point the cursor on the partition that will be filled with the new Windows 7, Click New. Then Click OK and OK. To note, here there is a value of how many "Byte Hard Disk". Install windows 7 on the new partition. Continue the installation on the New Partition. The display will be like the picture above, then point the cursor on the partition that will install the new Windows 7 "Primary", then click "Next". Wait for the windows 7 transfer process. Start the Installation Process. The installation process really starts, if you have reached this step you can really relax, because the next one will run automatically. Don't click anything, just let it restart by itself. If during "Expanding Windows files" there is an "error", it means that the laptop/computer memory is damaged, try starting again from the beginning if there is an "error". If smooth, Windows will restart automatically. Wait for further processing. The installation process continues automatically, then it will restart itself.

Fill in the Name for Laptop, Computer, free, Then Click "Next".

Note, if using a DVD does nothing, but if using a Flashdisk after the image is "restarted" the Flashdisk MUST be unplugged. After "Restart", in this step do not click anything, if you click it will start again like the step above. If using a flash there is no image above, it's been removed. Improved the Windows Installation Process. Leave it alone, don't click anything, move the "mouse" or drink coffee OK. Fill in the Name for Laptop, Computer, free, Then Click "Next". You don't have to fill it in, unless the laptop or computer wants to use a "password", then click "Next". If you already have a Windows 7 Code, type the code in the box provided, and click "Automatically activate Windows". If you don't have a code, don't fill in anything. Next to "Next" there will be "Skip", so click "Skip".

Complete Car Window Film Price List, Must Know!

Are you planning to buy an automatic car? Or planning to ride it in the near future? Maybe you already know that the way to drive an automatic car is different from the usual car, which shifts the gears manually. Automatic cars have automatic transmissions, where the automatic car gearshift system is designed to be able to move without having to step on the clutch pedal. Automatic transmission has two types of systems, both of which are also known to be simpler and easier, namely semi-automatic and automatic systems. This is How to Check Jakarta Number Plates, Easy! Even though it's automatic, it doesn't mean that driving an automatic type car is just playing the gas and brakes. You also have to be required to have a good feeling in measuring engine power because automatic cars also have transmissions that you can adjust depending on your needs. You will meet the automatic transmission lever with the code P, R, N, D, D3, 2 and L. If you are a new player in driving an automatic car, you are definitely confused by the letters and numbers that are rarely found. 9 Ways to Get Rid of Stickers on Motorcycles, Smooth Back Again! How to Check Vehicle Number Plate Owners Online, Easy! Complete Car Window Film Price List, Must Know! Well, to help you recognize a dead car gear, Qoala will explain in full about automatic car gear, from how to drive it, the meaning and function of each of the codes above and other information you need to drive an automatic car through this review.

If it's your first time driving an automatic car, you may be a little confused about how to drive it. Especially if you are used to using a manual car, which has a different way of operating the gear from the automatic one. This is because you don't have to adjust the clutch or shift gear because it's done automatically. You just need to stop and go without shifting gears or playing the clutch. But if you are not used to having to be careful, you might get confused between the brake pedal and the pedal or the wrong way to use the automatic car gear. Not infrequently heard of accidents because they are not familiar with how to shift gears automatic cars that are not familiar. Therefore you must know some important things in how to drive an automatic car below. As a beginner you need to be careful so that the lever is always in the correct position. First before starting the engine, the lever position must be in the P position or in the N position. Do not position the lever in reverse or R, these positions are used to reverse. If the lever is in the R position, the car will not start when it is started.

Related posts