SURABAYA (Reality) - The developer of the Puncak Permai Apartment, PT Surya Bumimegah Cemerlang, was sued by several apartment residents. Regarding this lawsuit, when it was confirmed, PT Surya Bumimegah Cemerlang seemed long-winded by applying convoluted procedures to journalists. To the media crew, a receptionist at the Puncak Permai Group office on Jalan Mayjend Sungkono, directed reporters to visit the Puncak Permai Management Agency office which is located on the ground floor of the apartment. Meanwhile, at the Puncak Permai Apartment on Wednesday (2/2/2022) at 15.30 Wib, one of the security personnel said that the operational hours of the Puncak Permai Management Agency Office were closed. When on Thursday (3/2/2002), the media crew again made it difficult to conduct interviews with the developer of the Puncak Permai Apartment. As previously reported, Siswanto, through his attorney from ARN Law Firm & Partners, sued the developer of the Puncak Permai Apartment, namely PT Surya Bumimegah Cemerlang. In the lawsuit that was registered with the Surabaya District Court under Case Number 80/Pdt.G/2022/PN.Sby, it was explained that Siswanto was the buyer of two units of Puncak Permai Surabaya Apartments with an agreement in the form of SPPJB in 2010 which was paid in full in 2011, but So far, his party has not received a certificate of payment in full, an AJB (Deed of Sale and Purchase) has not been carried out, and also a Certificate of Functionality (SLF) from the Puncak Permai Apartment until now there is no clarity. Siswanto's attorney, Zubairi, SH, MH, from ARN Law Firm & Partners, stated that what was done by the Puncak Permai Apartment developer was an act that harmed his client "Proof of payment is the right of the buyer when the payment for an apartment has been paid off. He emphasized that his party doubted the commitment of the Puncak Permai Apartment in Surabaya to also seriously take care of licensing matters because based on information from the Surabaya City Government, until October 26, 2020, the Certificate of Functionality (SLF) of the Puncak Permai Apartment is still in process and until now there has been no clarity from it. the developer of the Puncak Permai Apartment.
This is How to Check Jakarta Number Plates, Easy!
Are you planning to buy an automatic car? Or planning to ride it in the near future? Maybe you already know that the way to drive an automatic car is different from the usual car, which shifts the gears manually. Automatic cars have automatic transmissions, where the automatic car gearshift system is designed to be able to move without having to step on the clutch pedal. Automatic transmission has two types of systems, both of which are also known to be simpler and easier, namely semi-automatic and automatic systems. This is How to Check Jakarta Number Plates, Easy! Even though it's automatic, it doesn't mean that driving an automatic type car is just playing the gas and brakes. You also have to be required to have a good feeling in measuring engine power because automatic cars also have transmissions that you can adjust depending on your needs. You will meet the automatic transmission lever with the code P, R, N, D, D3, 2 and L. If you are a new player in driving an automatic car, you are definitely confused by the letters and numbers that are rarely found. 9 Ways to Get Rid of Stickers on Motorcycles, Smooth Back Again! How to Check Vehicle Number Plate Owners Online, Easy! Complete Car Window Film Price List, Must Know! Well, to help you recognize a dead car gear, Qoala will explain in full about automatic car gear, from how to drive it, the meaning and function of each of the codes above and other information you need to drive an automatic car through this review.
If it's your first time driving an automatic car, you may be a little confused about how to drive it. Especially if you are used to using a manual car, which has a different way of operating the gear from the automatic one. This is because you don't have to adjust the clutch or shift gear because it's done automatically. You just need to stop and go without shifting gears or playing the clutch. But if you are not used to having to be careful, you might get confused between the brake pedal and the pedal or the wrong way to use the automatic car gear. Not infrequently heard of accidents because they are not familiar with how to shift gears automatic cars that are not familiar. Therefore you must know some important things in how to drive an automatic car below. As a beginner you need to be careful so that the lever is always in the correct position. First before starting the engine, the lever position must be in the P position or in the N position. Do not position the lever in reverse or R, that position is used to reverse. If the lever is in the R position, the car will not start when it is started.
When you enter the key, do not immediately start the engine. You should wait for the needle to spin until the indicator is active or lit which indicates the electricity is ready. Some types of automatic cars provide an indicator in the form of sound when the car is really ready to be started. When first starting, it is recommended to step on and hold the brake pedal for safety reasons because you are afraid that the car will suddenly accelerate forward. Some automatic cars have an automatic procedure that keeps the engine running if you don't press the brake pedal, although some don't. When the engine is on and you want to start moving, the first step that needs to be done is to change the gear position of your automatic car which was originally in position P or N, to position R to go backwards or D to go forward. It is important to depress the brake pedal at the same time as moving the lever in gear. This method can prevent damage to the machine. The transmission lever aka gear or automatic car gear is an important component that affects the speed of the car.
Especially from the transmission side which uses different codes.
In general, whether it's Agya automatic car gear, Mobilio automatic car gear or others have DSLPR and N automatic car gears. Well, you need to understand each function of the automatic car gear. Riding mode or driving mode is present as a supporting feature in automatic cars now with varied choices. You can choose the mode that suits your needs, one of which is the economic mode. This economical mode is suitable for those of you who want to drive an automatic car more relaxed. If you want to go at a higher speed, you can choose the sport mode. This mode will set the car engine to maximum performance. There are still several more types of modes offered, please learn and use as needed. Automatic cars are also usually equipped with manual mode. Even though it's called manual, it doesn't mean you will operate it the same as a non-matic car. That's roughly how to drive an automatic transmission car alias matic. It's actually simpler and more practical than the manual one, but if you're not familiar, it takes time to adjust. Especially from the transmission side which uses different codes. Not only numbers that indicate the order of teeth as in manual cars, but the shape of the teeth of automatic cars also uses a code in the form of letters to indicate their respective functions. What are the codes and their functions? Let's move on to the next discussion. As already mentioned a little above, in general the transmission lever is marked with letters and numbers, namely P, R, N, D, 2, and L. This is standardly applied equally to various brands, be it in Xpander automatic car gears, Honda Jazz automatic car gears, Ayla automatic car gears and even Avanza automatic car gears.
39;s wheels can actually move, but the transmission is locked and the engine cannot move.
Therefore, in order to drive an automatic car well, you need to know what the letters and numbers mean and what their functions are. The letter P on automatic car gear stands for Parking alias parking. When you set the gear in this P position, the transmission will be locked and the car engine cannot move. But that does not mean its function is the same as the parking brake. Unlike the parking brake, when the transmission lever is in the P position, the car's wheels can actually move, but the transmission is locked and the engine cannot move. That's why the P position is used when the car is stopped for a long time or in parking conditions. The R symbol in automatic car gear stands for reverse.
As the name suggests, when the transmission lever is moved to the R position, it makes the automatic car you drive move backwards or backwards. Next is the code N which stands for neutral. In the N position, the car engine will be in neutral but not locked as in the P position earlier. So the car can still move forward or backward when pushed. In addition, the N transmission can also be used when the car needs to stop for a while, such as when conditions are jammed. You can use D or Drive to advance on flat and normal road terrain, aka not on incline or potholes. You just have to adjust the gas and brakes, shift gear problems, the Electronic Control Unit (ECU) embedded in automatic cars will do it for you automatically according to engine speed and car speed. Usually, code 2 on automatic car transmissions is located under D, while 3 is next to the D code. Position 3 or can be interpreted as D3 on automatic cars is used to instruct the engine to limit the maximum gearshift to 3rd gear only. While the position in 2 or automatic car gear S (Second) automatic car gear for an incline that is not too steep. Apart from going uphill, you can also use it when you need the engine brake when going downhill. When the incline has been successfully passed, do not forget to move the car transmission from the L position. This is important so that the engine and transmission do not receive heavy pressure so as not to damage the components inside. You can also use the L position as an engine brake, especially when you go on a fairly sharp derivative.
Some automatic cars also have Shift Lock, especially today's cars. The function of the Shift Lock button which is located near the transmission lever is to shift the gear lever from P to N even though the car engine is off. This feature is usually used when the cars are parked in parallel so that the car can still be pushed and does not block other cars that want to get out. That's the meaning and function of the codes on the automatic car gear that are commonly found. Even though you already know this information, sometimes there are still mistakes that are often made by automatic car drivers who are not familiar with the control of their mounts. As a new user who is not familiar with how to shift automatic car gears, you must often make mistakes. Well, usually there are some of the most common mistakes made, starting with the wrong way of shifting automatic car gears while traveling or on how to shift automatic car gears on an incline. Here are some of the most common mistakes that new automatic car users make that you should avoid. As explained above when the car has to stop for a while, then position the transmission in Neutral (N). Often found people are still using the transmission drive (D) while waiting for a red light or when there is a traffic jam. Even though this is quite risky because your car could run automatically and bump into other vehicles in front of it.
Indeed, you can still prevent it by pressing the brake pedal so that the vehicle does not move forward, but if you do it for too long it can be very burdensome for the gearbox and engine work. An overloaded gearbox and engine can increase the risk of damage to the car. So from now on, make sure the transmission is in the Neutral (N) position when it stops at a red light or is stuck in traffic. Another common mistake is to use the transmission in the Neutral (N) position on an uphill road in order to save fuel. Even though this poses a risk of endangering the driver himself or other road users. The position of the N transmission makes the car control less. As discussed earlier you can use Second (2) for a not steep incline or Low (L) when the incline is very steep. You can also use a combination of transmissions in the D and Low (L) positions. The P symbol is used for parking conditions, aka the car has stopped for a long time. It may also be because they are in a hurry, they often park the car with the gear lever still in the N or D position. As a result, when they want to get out of the car and the brake pedal is released, the car slides and hits the vehicle or a wall or other object in front of the car.. Not only that, sometimes their lever position is in neutral (N) when parking.