There is no definite provision for the duration of the initial charge. It is recommended to use an official charger from realme when charging, and ensure that the battery temperature does not exceed 45 degrees. Settings and steps may differ on each mobile device. After the backup process from the "Backup and reset" menu is complete, it is recommended to perform a manual backup to a memory card or PC for an alternative backup. Do not turn off or restart during the data backup process. The data backup will be lost when the phone is flashed or a Factory Reset is performed. 4. Shake the phone slowly and in the opposite direction to where the water/liquid enters, so that the liquid can come out. 5. Dry the phone using a fan or hairdryer (Normal temperature). Additional tips: Put the phone in the rice for 2-3 days. Handling can reduce the impact of damage to the phone due to exposure to water/liquid.
39;s SIM and SD Card.
However, there is still a risk of damage to the phone hardware. It is recommended to bring the phone to the nearest realme Service Center for further treatment. Perform data backup (if still possible). Bring a warranty card and proof of purchase. Save your phone's SIM and SD Card. 1. Insert the SIM ejector needle into the hole next to the SIM card holder. 2. After popping out, Pull out the SIM card holder and place the SIM card according to the existing slot. 3. Reinsert the SIM card holder in a horizontal position. If the SIM card size does not match, it is recommended to visit the provider to exchange the card with the appropriate size (nano). Do not cut the SIM card, because it will cause damage to the SIM card. Do not insert and remove the SIM card while the phone is on. Drag the application interface down until a lock/lock image appears on the far left.
Store additional accessories on the phone such as SIM cards, SD cards and phone cases.
For security and privacy purposes, Google has removed the "Forgot Pattern" function to protect the security and privacy of these phones. If the data has not been backed up before you forgot your phone lock screen pattern/password, then the data in the phone cannot be saved. Store additional accessories on the phone such as SIM cards, SD cards and phone cases. 1. Dip a lint-free cloth or cotton swab in distilled water or a low-alcohol liquid. Swipe on the phone screen. 2. Use a toothbrush or toothpick to clean the cracks and holes on the phone. 3. Use a hairdryer at normal temperature to clean the phone dust. 4. If cleaning can't be done, Suggest users to visit the nearest realme Service Center to get professional treatment. It is forbidden to use a hair dryer at high temperature when cleaning the dust on the phone, to avoid the phone from being damaged by the overheating of the phone. Do not remove the battery cover during the cleaning debut to avoid damaging the electrical components of the phone. You choose according to the conditions you want. Back up your data before updating the system. System update takes 3-5 minutes. Don't force power off your phone during the update. 3. Scan the QR Code issued from the new phone to start the cloning process. 4. During the cloning process, make sure the two phones are close together to maintain a stable connection between the two phones.
Are you planning to buy an automatic car? Or planning to ride it in the near future? Maybe you already know that the way to drive an automatic car is different from the usual car, which shifts the gears manually. Automatic cars have automatic transmissions, where the automatic car gearshift system is designed to be able to move without having to step on the clutch pedal. Automatic transmission has two types of systems, both of which are also known to be simpler and easier, namely semi-automatic and automatic systems. This is How to Check Jakarta Number Plates, Easy! Even though it's automatic, it doesn't mean that driving an automatic type car is just playing the gas and brakes. You also have to be required to have a good feeling in measuring engine power because automatic cars also have transmissions that you can adjust depending on your needs. You will meet the automatic transmission lever with the code P, R, N, D, D3, 2 and L. If you are a new player in driving an automatic car, you are definitely confused by the letters and numbers that are rarely found. 9 Ways to Get Rid of Stickers on Motorcycles, Smooth Back Again! How to Check Vehicle Number Plate Owners Online, Easy! Complete Car Window Film Price List, Must Know! Well, to help you recognize a dead car gear, Qoala will explain in full about automatic car gear, from how to drive it, the meaning and function of each of the codes above and other information you need to drive an automatic car through this review.
Therefore you must know some important things in how to drive an automatic car below.
If it's your first time driving an automatic car, you may be a little confused about how to drive it. Especially if you are used to using a manual car, which has a different way of operating the gear from the automatic one. This is because you don't have to adjust the clutch or shift gear because it's done automatically. You just need to stop and go without shifting gears or playing the clutch. But if you are not used to having to be careful, you might get confused between the brake pedal and the pedal or the wrong way to use the automatic car gear. Not infrequently heard of accidents because they are not familiar with how to shift gears automatic cars that are not familiar. Therefore you must know some important things in how to drive an automatic car below. As a beginner you need to be careful so that the lever is always in the correct position. First before starting the engine, the lever position must be in the P position or in the N position. Do not position the lever in reverse or R, these positions are used to reverse. If the lever is in the R position, the car will not start when it is started.
When you enter the key, do not immediately start the engine. You should wait for the needle to spin until the indicator is active or lit which indicates the electricity is ready. Some types of automatic cars provide an indicator in the form of sound when the car is really ready to be started. When first starting, it is recommended to step on and hold the brake pedal for safety reasons because you are afraid that the car will suddenly accelerate forward. Some automatic cars have an automatic procedure that keeps the engine running if you don't press the brake pedal, although some don't. When the engine is on and you want to start moving, the first step that needs to be done is to change the gear position of your automatic car which was originally in position P or N, to position R to go backwards or D to go forward. It is important to depress the brake pedal at the same time as moving the lever in gear. This method can prevent damage to the machine. The transmission lever aka gear or automatic car gear is an important component that affects the speed of the car.
In general, whether it's Agya automatic car gear, Mobilio automatic car gear or others have DSLPR and N automatic car gears. Well, you need to understand each function of the automatic car gear. Riding mode or driving mode is present as a supporting feature in automatic cars now with varied choices. You can choose the mode that suits your needs, one of which is the economic mode. This economical mode is suitable for those of you who want to drive an automatic car more relaxed. If you want to go at a higher speed, you can choose the sport mode. This mode will set the car engine to maximum performance. There are still several more types of modes offered, please learn and use as needed. Automatic cars are also usually equipped with manual mode. Even though it's called manual, it doesn't mean you will operate it the same as a non-matic car. That's roughly how to drive an automatic transmission car alias matic. It's actually simpler and more practical than the manual one, but if you're not familiar, it takes time to adjust. Especially from the transmission side which uses different codes. Not only numbers that indicate the order of teeth as in manual cars, but the shape of the teeth of automatic cars also uses a code in the form of letters to indicate their respective functions. What are the codes and their functions? Let's move on to the next discussion. As already mentioned a little above, in general, the transmission lever is marked with letters and numbers, namely P, R, N, D, 2, and L. This is standardly applied to various brands, be it in Xpander automatic car gears, gear shifters Honda Jazz automatic car, Ayla automatic car gear and even Avanza automatic car gear.