Not long ago, precisely in January 2022, Telkomsel also announced that it would migrate all 3G network services to the 4G LTE network, starting in 2022. With this migration, Telkomsel will eventually turn off its 3G signal. Whereas in Indonesia itself, 3G networks are still a mainstay for some people to access the internet on their cellphones. So, why does the 3G signal in Indonesia want to be turned off? Kominfo spokesman Dedy Permadi and two telecommunication observers, namely Moch S. Hendrowijono and Ian Yosef M. Edward also opened up about the reasons behind the plan to eliminate 3G signals in Indonesia. Dedy via short message to KompasTekno. Even telecommunications observer Moch S. Hendrowijono said that the abolition of 3G networks in Indonesia should have been carried out earlier, namely several years ago.
39;s according to Hendro.
Hendro told KompasTekno. So, it is not new if there is a plan to remove this 3G signal. Indeed, in terms of speed, technically, 3G networks only have an average speed of 2 Mbps and a maximum speed of up to 14 Mbps. Unlike the 4G network, which is technically capable of producing faster download speeds, which is between 10 Mbps to 1 Gbps. 4G technology is also known as the world's first IP-based cellular network, which is able to accommodate Quality of Service (QoS) as well as wireless broadband access on Multimedia Messaging Service (MMS), video conversations, mobile TV, HDTV content, to Digital Video Broadcasting (DVB).. In addition to the old technology, 3G networks are also called a burden on the network. At least that's according to Hendro. So far, 3G and 4G networks in Indonesia have indeed occupied the same frequency spectrum, namely 900 MHz, 1,800 MHz and 2,100 GHz. Dedy also revealed that currently, the need for broadband networks in Indonesia is very high. This requires the development of next-generation network technology, such as faster 4G and 5G. In order to accommodate the high demand for broadband networks while at the same time providing better cellular internet services, it is necessary to turn off cellular internet services using 3G technology in Indonesia. In other words, the frequency allocation that has been used to deploy 3G as well as 4G will be fully used for 4G services only. That way, said Dedy, people will get 4G technology services that are of higher quality and in accordance with their current high needs. According to Dedy, another thing that the government considers to study the elimination of 3G signals in Indonesia is the number of 3G subscribers which is said to be decreasing day by day.
Even so, Dedy did not provide data on the number of Indonesian cellular subscribers who still use a 3G SIM card or have not upgraded to a 4G SIM card in Indonesia. KompasTekno also tried to request data for 3G-only subscribers in Indonesia from each cellular operator, such as Telkomsel, Indosat Ooredoo Hutchison (a company resulting from the merger of Indosat Ooredoo-Tri), and XL Axiata. KompasTekno did not ask Smartfren about the number of subscribers, because this operator has turned off its 3G service since 2017. Although there is no data that specifically mentions how many there are, it does not mean that 3G-only subscribers are no longer in Indonesia. The reason users have not upgraded from 3G to 4G is probably because they may not realize the benefits of 4G or may have disabled the 4G connection on their phone.
How to Check Vehicle Number Plate Owners Online, Easy!
Are you planning to buy an automatic car? Or planning to ride it in the near future? Maybe you already know that the way to drive an automatic car is different from the usual car, which shifts the gears manually. Automatic cars have automatic transmissions, where the automatic car gearshift system is designed to be able to move without having to step on the clutch pedal. Automatic transmission has two types of systems, both of which are also known to be simpler and easier, namely semi-automatic and automatic systems. This is How to Check Jakarta Number Plates, Easy! Even though it's automatic, it doesn't mean that driving an automatic type car is just playing the gas and brakes. You also have to be required to have a good feeling in measuring engine power because automatic cars also have transmissions that you can adjust depending on your needs. You will meet the automatic transmission lever with the code P, R, N, D, D3, 2 and L. If you are a new player in driving an automatic car, you are definitely confused by the letters and numbers that are rarely found. 9 Ways to Get Rid of Stickers on Motorcycles, Smooth Back Again! How to Check Vehicle Number Plate Owners Online, Easy! Complete Car Window Film Price List, Must Know! Well, to help you recognize a dead car gear, Qoala will explain in full about automatic car gear, from how to drive it, the meaning and function of each of the codes above and other information you need to drive an automatic car through this review.
First before starting the engine, the lever position must be in the P position or in the N position.
If it's your first time driving an automatic car, you may be a little confused about how to drive it. Especially if you are used to using a manual car, which has a different way of operating the gear from the automatic one. This is because you don't have to adjust the clutch or shift gear because it's done automatically. You just need to stop and go without shifting gears or playing the clutch. But if you are not used to having to be careful, you might get confused between the brake pedal and the pedal or the wrong way to use the automatic car gear. Not infrequently heard of accidents because they are not familiar with how to shift gears automatic cars that are not familiar. Therefore you must know some important things in how to drive an automatic car below. As a beginner you need to be careful so that the lever is always in the correct position. First before starting the engine, the lever position must be in the P position or in the N position. Do not position the lever in reverse or R, these positions are used to reverse. If the lever is in the R position, the car will not start when it is started.
When you enter the key, do not immediately start the engine. You should wait for the needle to spin until the indicator is active or lit which indicates the electricity is ready. Some types of automatic cars provide an indicator in the form of sound when the car is really ready to be started. When first starting, it is recommended to step on and hold the brake pedal for safety reasons because you are afraid that the car will suddenly accelerate forward. Some automatic cars have an automatic procedure that keeps the engine running if you don't press the brake pedal, although some don't. When the engine is on and you want to start moving, the first step that needs to be done is to change the gear position of your automatic car which was originally in position P or N, to position R to go backwards or D to go forward. It is important to depress the brake pedal at the same time as moving the lever in gear. This method can prevent damage to the machine. The transmission lever aka gear or automatic car gear is an important component that affects the speed of the car.
In general, whether it's Agya automatic car gear, Mobilio automatic car gear or others have DSLPR and N automatic car gears. Well, you need to understand each function of the automatic car gear. Riding mode or driving mode is present as a supporting feature in automatic cars now with varied choices. You can choose the mode that suits your needs, one of which is the economic mode. This economical mode is suitable for those of you who want to drive an automatic car more relaxed. If you want to go at a higher speed, you can choose the sport mode. This mode will set the car engine to maximum performance. There are still several more types of modes offered, please learn and use as needed. Automatic cars are also usually equipped with manual mode. Even though it's called manual, it doesn't mean you will operate it the same as a non-matic car. That's roughly how to drive an automatic transmission car alias matic. It's actually simpler and more practical than the manual one, but if you're not familiar, it takes time to adjust. Especially from the transmission side which uses different codes. Not only numbers that indicate the order of teeth as in manual cars, but the shape of the teeth of automatic cars also uses a code in the form of letters to indicate their respective functions. What are the codes and their functions? Let's move on to the next discussion. As already mentioned a little above, in general, the transmission lever is marked with letters and numbers, namely P, R, N, D, 2, and L. This is standardly applied to various brands, be it in Xpander automatic car gears, gear shifters Honda Jazz automatic car, Ayla automatic car gear and even Avanza automatic car gear.
Therefore, in order to drive an automatic car well, you need to know what the letters and numbers mean and what their functions are. The letter P on automatic car gear stands for Parking alias parking. When you set the gear in this P position, the transmission will be locked and the car engine cannot move. But that does not mean its function is the same as the parking brake. Unlike the parking brake, when the transmission lever is in the P position, the car's wheels can actually move, but the transmission is locked and the engine cannot move. That's why the P position is used when the car is stopped for a long time or in parking conditions. The R symbol in automatic car gear stands for reverse.